6
General operaon
Seng the Current Time
1. All digits should now be ashing.
2. Press the CLOCK key to set the HOUR.
3. Press the TIMER key to set the MINUTE.
4. Press the SET key once to conrm the me, now the display will show
either 12 or 24 to indicate the display mode.
5. Press the CLOCK key to change between 12 or 24-hour display mode.
6. Press the START key to CONFIRM the clock setup.
7. (1 :07) will be ashing and you must now set the feeding mes.
Seng the Feed Time and Number of Feeds per Day
1. (1 07) should now be ashing. Digit-1 is the feeding number (mes per
day), Digits 3 & 4 are the feeding me (in hours).
2. The display shows the 1st feeding me (1 07) this means the 1st feeding
will be at 7am.
3. With (1 07) ashing, press and hold (for 2 seconds) the SET key unl Digit 3
& 4 start ashing (07).
4. Press the TIMER key to set the desired hour for feeding.
5. Press the SET key to conrm your seng and proceed to the 2nd feeding
me.
6. Repeat step 4 to set the desired hour for the SECOND feeding me.
7. At this point if you want to only feed 2 mes per day. Press the START key
and you’re nished.
8. If you wish to feed a 3rd or 4th me each day, do not press the START key
and repeat from step 4.
Tip: If you pressed the SET key a 3
rd
me, but you did not want to feed 3 mes
per day, just press the TIMER key and then press and hold the SET key (for 2
seconds) to start over, remember not to press the SET key aer the second
feeding, press the START key to end your number of feedings per day.
Commentaires sur ces manuels